关键字

全部产品

  • 产品名称: BI-DIRECTIONAL DOUBLE LIP SPRING LOADED PARKER OIL SEAL (DB DC DA)
  • 浏览次数: 57

Parker DB, DC, and DA rotary shaft oil seal profiles feature two opposite facing spring loaded elastomer lips with metal case for general bi-directional fluid sealing, fluid separation or contamination exclusion. A stainless steel garter spring provides constant, uniform load of the each elastomer lip on the shaft for the life of the seal. The spring keeps the elastomer lip in contact with the shaft during higher shaft speeds and also helps offset normally occurring compression set and wear of the lip material.

DB Profile: Single metal case with ParKote™ bore sealant or ground outside diameter. Used in metal or cast steel housing applications.

DC Profile: Rubber covered metal case for improved OD sealing. Used in applications with soft alloy housings.

DA Profile: Assembled dual case with ParKote™ bore sealant or ground OD. Used where structural rigidity is required and for blind shaft installation.

Standard Lip Materials:
NBR: Temp -20F / +250F
FKM: Temp -40F / +400F

Shaft Surface Speed: Up to 2000 fpm (10.2 m/s) depending upon pressure

Maximum Pressure: 0 to 7 psi (0 to 0.48 bar) depending on shaft speed 

Size Range: 1/4 to 4 inches (6.4 to 101 mm) 

Maximum Shaft Dynamic Runout (TIR): 0.010” (0.254 mm)

Maximum (STBM) Misalignment: 0.010” (0.254 mm)

Typical Applications:
For use in general pressure applications requiring bi-directional fluid separation or contamination exclusion.

轴径 (IN)
0.250 to 4.000
轴径 (MM)
6.4 to 102
聚合物系列
NBR (Nitrile-Butadiene), FKM, FPM (Fluorocarbon)
最低工作温度 (F)
-40 (-40 C)
最高工作温度 (F)
400 (204 C)
最大轴动态跳动 (TIR)
0.010"
最大 (STBM) 不对准
0.010"
最大压力 (PSI)
最大表面速度(FPM)
密封类型
轴密封材料

关键词: